Both are options.
If you already have the material or have a way to get it easily, bring it over and we’ll work on your material.
We also work with a number of suppliers for metals, plastics, fiberglass, carbon fiber, rubber, foams and other materials. If you need a specific material, we can probably get a hold of it. If we’re ordering the material for you, we’ll require a deposit.
None of our quotes include shipping, crating, or delivery.
We can ship if needed, using your preferred carrier.
Our tolerances range from 0.005” to 0.03”. Without getting too technical, we reach tighter tolerances with preparation work and reducing the speed of the water jet, which both increase the price.
Our typical taper (difference between the top and the bottom of the cut) is as low as 1% of the depth of material thickness. Reducing the taper is achieved by slowing down the cut, which, again, increases the price.
Edge quality is also affected by the speed of the waterjet. By slowing down the speed of the cut, we can get a fine, smooth edge, or we can speed things up with a rougher edge.
We want to work with you to get the right balance of cost and precision.
